Information
Extends from Modelica.Icons.SourcesPackage (Icon for packages containing sources).
Package Content
| Name |
Description |
AccelerationConst
|
Constant signal of type Acceleration |
AmountOfSubstanceConst
|
Constant signal of type AmountOfSubstance |
ConcentrationConst
|
Constant signal of type Concentration |
DensityConst
|
Constant signal of type Density |
DiffusionPermeabilityConst
|
Constant signal of type DiffusionPermeability |
ElectricChargeConst
|
Constant signal of type ElectricCharge |
ElectricCurrentConst
|
Constant signal of type ElectricCurrent |
ElectricPotentialConst
|
Constant signal of type ElectricPotential |
EnergyConst
|
Constant signal of type Energy |
EnthalpyConst
|
Constant signal of type Enthalpy |
MolarEnthalpyConst
|
Constant signal of type MolarEnthalpy |
FractionConst
|
Constant signal of type Fraction |
FrequencyConst
|
Constant signal of type Frequency |
GasSolubilityConst
|
Constant signal of type GasSolubility |
HeatConst
|
Constant signal of type Heat |
HeightConst
|
Constant signal of type Height |
HeatFlowRateConst
|
Constant signal of type HeatFlowRate |
HydraulicComplianceConst
|
Constant signal of type HydraulicCompliance |
HydraulicElastanceConst
|
Obsolete, please use HydraulicCompliance instead! |
HydraulicElastanceToComplianceConst
|
Constant signal of type HydraulicCompliance from HydraulicElastance constant |
HydraulicConductanceConst
|
Constant signal of type HydraulicConductance |
HydraulicResistanceConst
|
Obsolete, please use HydraulicConductance instead! |
HydraulicResistanceToConductanceConst
|
Constant signal of type HydraulicConductance from HydraulicResistance parameter |
HydraulicInertanceConst
|
Constant signal of type HydraulicInertance |
MassConst
|
Constant signal of type Mass |
MassConcentrationConst
|
Constant signal of type MassConcentration |
MassFlowRateConst
|
Constant signal of type MassFlowRate |
MolarFlowRateConst
|
Constant signal of type MolarFlowRate |
OsmolarityConst
|
Constant signal of type Osmolarity |
OsmoticPermeabilityConst
|
Constant signal of type OsmoticPermeability |
PressureConst
|
Constant signal of type Pressure |
SpecificEnergyConst
|
Constant signal of type SpecificEnergy |
SpecificEnthalpyConst
|
Constant signal of type SpecificEnthalpy |
SpecificHeatCapacityConst
|
Constant signal of type SpecificHeatCapacity |
TemperatureConst
|
Constant signal of type Temperature |
ThermalConductanceConst
|
Constant signal of type ThermalConductance |
TimeConst
|
Constant signal of type Time |
VolumeFlowRateConst
|
Constant signal of type VolumeFlowRate |
VolumeConst
|
Constant signal of type Volume |
DeprecatedUntypedConstant
|
Deprecated Untyped Constant for automatic conversion from initial versions of Physiolibrary |
pHConst
|
Constant signal of type pH |
VolumeDensityOfChargeConst
|
Constant signal of type VolumeDensityOfCharge |
VelocityConst
|
Constant signal of type Velocity |
PowerConst
|
Constant signal of type Power |
PositionConst
|
Constant signal of type Position |
MolarEnergyConst
|
Constant signal of type MolarEnergy |
OneConst
|
1 |
PopulationConst
|
Constant signal of type Population |
PopulationChangeConst
|
Constant signal of type PopulationChange |
PopulationChangePerMemberConst
|
Constant signal of type PopulationChangePerMember |
Constant signal of type Acceleration
Parameters
| Name | Description |
| k | Constant Acceleration output value [m/s2] |
Connectors
| Name | Description |
| y | Acceleration constant [m/s2] |
Constant signal of type AmountOfSubstance
Parameters
| Name | Description |
| k | Constant AmountOfSubstance output value [mol] |
Connectors
| Name | Description |
| y | AmountOfSubstance constant [mol] |
Constant signal of type Concentration
Parameters
| Name | Description |
| k | Constant Concentration output value [mol/m3] |
Connectors
| Name | Description |
| y | Concentration constant [mol/m3] |
Constant signal of type Density
Parameters
| Name | Description |
| k | Constant Density output value [kg/m3] |
Connectors
| Name | Description |
| y | Density constant [kg/m3] |
Constant signal of type DiffusionPermeability
Parameters
| Name | Description |
| k | Constant DiffusionPermeability output value [m3/s] |
Connectors
| Name | Description |
| y | DiffusionPermeability constant [m3/s] |
Constant signal of type ElectricCharge
Parameters
| Name | Description |
| k | Constant ElectricCharge output value [C] |
Connectors
| Name | Description |
| y | ElectricCharge constant [C] |
Constant signal of type ElectricCurrent
Parameters
| Name | Description |
| k | Constant ElectricCurrent output value [A] |
Connectors
| Name | Description |
| y | ElectricCurrent constant [A] |
Constant signal of type ElectricPotential
Parameters
| Name | Description |
| k | Constant ElectricPotential output value [V] |
Connectors
| Name | Description |
| y | ElectricPotential constant [V] |
Constant signal of type Energy
Parameters
| Name | Description |
| k | Constant Energy output value [J] |
Connectors
| Name | Description |
| y | Energy constant [J] |
Constant signal of type Enthalpy
Parameters
| Name | Description |
| k | Constant Enthalpy output value [J] |
Connectors
| Name | Description |
| y | Enthalpy constant [J] |
Constant signal of type MolarEnthalpy
Parameters
| Name | Description |
| k | Constant Enthalpy output value [J/mol] |
Connectors
| Name | Description |
| y | Molar Enthalpy constant [J/mol] |
Constant signal of type Fraction
Parameters
| Name | Description |
| k | Constant Fraction output value [1] |
Connectors
| Name | Description |
| y | Fraction constant [1] |
Constant signal of type Frequency
Parameters
| Name | Description |
| k | Constant Frequency output value [Hz] |
Connectors
| Name | Description |
| y | Frequency constant [Hz] |
Constant signal of type GasSolubility
Parameters
| Name | Description |
| k | Constant GasSolubility output value [(mol/m3)/(mol/m3)] |
Connectors
| Name | Description |
| y | GasSolubility constant [(mol/m3)/(mol/m3)] |
Constant signal of type Heat
Parameters
| Name | Description |
| k | Constant Heat output value [J] |
Connectors
| Name | Description |
| y | Heat constant [J] |
Constant signal of type Height
Parameters
| Name | Description |
| k | Constant Height output value [m] |
Connectors
| Name | Description |
| y | Height constant [m] |
Constant signal of type HeatFlowRate
Parameters
| Name | Description |
| k | Constant HeatFlowRate output value [W] |
Connectors
| Name | Description |
| y | HeatFlowRate constant [W] |
Constant signal of type HydraulicCompliance
Parameters
| Name | Description |
| k | Constant HydraulicCompliance output value [m3/Pa] |
Connectors
| Name | Description |
| y | HydraulicCompliance constant [m3/Pa] |
Obsolete, please use HydraulicCompliance instead!
Information
Please use the reciprocal value of hydraulic elastance, wich is called hydraulic compliance for the compatibility with other blocks and models!
Even it is not recommended, you can use this block, but do not forget to make reciprocal value (in example using Blocks.Math.Reciprocal) before connecting to library components!
Extends from Modelica.Icons.ObsoleteModel (Icon for classes that are obsolete and will be removed in later versions).
Parameters
| Name | Description |
| k | Hydraulic elastance [Pa/m3] |
Connectors
| Name | Description |
| y | HydraulicElastance constant [Pa/m3] |
Constant signal of type HydraulicCompliance from HydraulicElastance constant
Parameters
| Name | Description |
| k | Reciprocal constant value of hydraulic compliance [Pa/m3] |
Connectors
| Name | Description |
| y | HydraulicCompliance constant [m3/Pa] |
Constant signal of type HydraulicConductance
Parameters
| Name | Description |
| k | Constant HydraulicConductance output value [m3/(Pa.s)] |
Connectors
| Name | Description |
| y | HydraulicConductance constant [m3/(Pa.s)] |
Obsolete, please use HydraulicConductance instead!
Information
Please use the reciprocal value of hydraulic resistance, wich is called hydraulic conductance for the compatibility with other blocks and models!
Because zero hydraulic conductance means zero volumetric flow, it is much better to use this reciprocal value of hydraulic resistance.
Even it is not recommended, you can use this block, but do not forget to make reciprocal value (in example using Blocks.Math.Reciprocal) before connecting to library components!
Parameters
| Name | Description |
| k | Hydraulic resistance [(Pa.s)/m3] |
Connectors
| Name | Description |
| y | HydraulicResistance constant [(Pa.s)/m3] |
Constant signal of type HydraulicConductance from HydraulicResistance parameter
Parameters
| Name | Description |
| k | Reciprocal constant value of hydraulic conductance [(Pa.s)/m3] |
Connectors
| Name | Description |
| y | HydraulicConductance constant [m3/(Pa.s)] |
Constant signal of type HydraulicInertance
Parameters
| Name | Description |
| k | Constant HydraulicInertance output value [Pa.s2/kg] |
Connectors
| Name | Description |
| y | HydraulicInertance constant [Pa.s2/kg] |
Constant signal of type Mass
Parameters
| Name | Description |
| k | Constant Mass output value [kg] |
Connectors
| Name | Description |
| y | Mass constant [kg] |
Constant signal of type MassConcentration
Parameters
| Name | Description |
| k | Constant MassConcentration output value [kg/m3] |
Connectors
| Name | Description |
| y | MassConcentration constant [kg/m3] |
Constant signal of type MassFlowRate
Parameters
| Name | Description |
| k | Constant MassFlowRate output value [kg/s] |
Connectors
| Name | Description |
| y | MassFlowRate constant [kg/s] |
Constant signal of type MolarFlowRate
Parameters
| Name | Description |
| k | Constant MolarFlowRate output value [mol/s] |
Connectors
| Name | Description |
| y | MolarFlowRate constant [mol/s] |
Constant signal of type Osmolarity
Parameters
| Name | Description |
| k | Constant Osmolarity output value [mol/m3] |
Connectors
| Name | Description |
| y | Osmolarity constant [mol/m3] |
Constant signal of type OsmoticPermeability
Parameters
| Name | Description |
| k | Constant OsmoticPermeability output value [m3/(Pa.s)] |
Connectors
| Name | Description |
| y | OsmoticPermeability constant [m3/(Pa.s)] |
Constant signal of type Pressure
Parameters
| Name | Description |
| k | Constant Pressure output value [Pa] |
Connectors
| Name | Description |
| y | Pressure constant [Pa] |
Constant signal of type SpecificEnergy
Parameters
| Name | Description |
| k | Constant SpecificEnergy output value [J/kg] |
Connectors
| Name | Description |
| y | SpecificEnergy constant [J/kg] |
Constant signal of type SpecificEnthalpy
Parameters
| Name | Description |
| k | Constant SpecificEnthalpy output value [J/kg] |
Connectors
| Name | Description |
| y | SpecificEnthalpy constant [J/kg] |
Constant signal of type SpecificHeatCapacity
Parameters
| Name | Description |
| k | Constant SpecificHeatCapacity output value [J/(kg.K)] |
Connectors
| Name | Description |
| y | SpecificHeatCapacity constant [J/(kg.K)] |
Constant signal of type Temperature
Parameters
| Name | Description |
| k | Constant Temperature output value [K] |
Connectors
| Name | Description |
| y | Temperature constant [K] |
Constant signal of type ThermalConductance
Parameters
| Name | Description |
| k | Constant ThermalConductance output value [W/K] |
Connectors
| Name | Description |
| y | ThermalConductance constant [W/K] |
Constant signal of type Time
Parameters
| Name | Description |
| k | Constant Time output value [s] |
Connectors
| Name | Description |
| y | Time constant [s] |
Constant signal of type VolumeFlowRate
Parameters
| Name | Description |
| k | Constant VolumeFlowRate output value [m3/s] |
Connectors
| Name | Description |
| y | VolumeFlowRate constant [m3/s] |
Constant signal of type Volume
Parameters
| Name | Description |
| k | Constant Volume output value [m3] |
Connectors
| Name | Description |
| y | Volume constant [m3] |
Deprecated Untyped Constant for automatic conversion from initial versions of Physiolibrary
Information
Extends from Modelica.Icons.ObsoleteModel (Icon for classes that are obsolete and will be removed in later versions).
Parameters
| Name | Description |
| k | Untyped constant output value |
| varName | |
| units | |
Connectors
| Name | Description |
| y | Untyped constant |
Constant signal of type pH
Parameters
| Name | Description |
| k | Constant pH output value [1] |
Connectors
| Name | Description |
| y | pH constant [1] |
Constant signal of type VolumeDensityOfCharge
Parameters
| Name | Description |
| k | Constant VolumeDensityOfCharge output value [C/m3] |
Connectors
| Name | Description |
| y | VolumeDensityOfCharge constant [C/m3] |
Constant signal of type Velocity
Parameters
| Name | Description |
| k | Constant Velocity output value [m/s] |
Connectors
| Name | Description |
| y | Velocity constant [m/s] |
Constant signal of type Power
Parameters
| Name | Description |
| k | Constant Power output value [W] |
Connectors
| Name | Description |
| y | Power constant [W] |
Constant signal of type Position
Parameters
| Name | Description |
| k | Constant Position output value [m] |
Connectors
| Name | Description |
| y | Position constant [m] |
Constant signal of type MolarEnergy
Parameters
| Name | Description |
| k | Constant MolarEnergy output value [J/mol] |
Connectors
| Name | Description |
| y | MolarEnergy constant [J/mol] |
1
Connectors
Constant signal of type Population
Parameters
| Name | Description |
| k | Constant Population output value [1] |
Connectors
| Name | Description |
| y | Population constant [1] |
Constant signal of type PopulationChange
Parameters
| Name | Description |
| k | Constant PopulationChange output value [1/s] |
Connectors
| Name | Description |
| y | PopulationChange constant [1/s] |
Constant signal of type PopulationChangePerMember
Parameters
| Name | Description |
| LifeTime | Mean lifetime as 1/PopulationChangePerMember output value [s] |
Connectors
| Name | Description |
| y | PopulationChangePerMember constant [1/s] |
Automatically generated Wed Oct 11 14:54:25 2023.